Skip to main content

Introduction

Hoterip is an OTA that can be integrated with the Channel Manager. Through this integration, you can manage your property listings, synchronize room availability, rates, and restrictions, and receive bookings directly within the system.

Once the integration is fully configured, all reservations from Hoterip will appear in the Booking List, allowing you to manage them efficiently in one place.

Accessing Hoterip Setting​

Here’s how you can access Hoterip setting:

  1. On the Channelku, navigate to the Channel Manager menu, then click Control Panel. control-panel-menu
  2. Select Hoterip from the channel list, or you can search from the list by type the OTA name. access-hoterip.png

Hoterip Information​

The Hoterip Information tab provides the basic connection procedure between the system and Hoterip. Make sure you follow these steps:

StepDescription
1. Who can request connection?Channel Manager or HOTEL itself
2. Who must be contacted?Hoterip Connectivity Services: dev@hoterip.com
3. Which information is required to open connection?Hotel ID from Hoterip
4. Extranet URLhttp://my.hoterip.com/login
hoterip-information-v1.png

[!NOTE]

Troubleshooting Hoterip Information​

Cannot initiate connection with Hoterip

  • Confirm that the request is initiated by the Channel Manager or hotel representative.
  • Ensure you have contacted dev@hoterip.com as instructed.

Missing required information

  • Make sure the Hotel ID is available before making the request.
  • Double-check the format of the Hotel ID copied from Hoterip extranet.

Invalid or outdated extranet URL

  • Use the correct URL: http://my.hoterip.com/login. If it does not load, check your internet connection or contact Hoterip support.

Username​

The Username tab is used to view or update the credentials required to connect with Hoterip.

How to Update Credential​

  1. Navigate to the Username tab. Enter the Hotel ID assigned to your property by Hoterip. hoterip-username-v1.png
  2. Click the save  (✓) button to apply the change. If you don’t want to save the change, click cancel (x).

[!NOTE]

Troubleshooting Credential Update​

Failed to Save Hotel ID

  • Make sure the Hotel ID is valid and correctly copied from Hoterip.
  • Check your internet connection and try again.

Changes Not Reflected After Saving

  • Refresh the page to confirm if the changes have been applied.
  • If not saved, re-enter the Property ID and click the save (✓) button

Mapping​

The Mapping feature is used to link your internal rooms and rate plans with the corresponding rooms and rate plans from Hoterip. To create room mapping, please follow the steps in Mapping OTA and IBE).

Settings​

The Settings tab controls how your system interacts with Hoterip, including data synchronization and reservation handling.

How to Configure Setting​

To modify Hoterip parameters, navigate to the Settings tab. This section contains several configurable option: hoterip-setting-v1.png

  1. Enable Channel: Enable this option to activate the connection between the property and Hoterip.
  2. Activate Updates: Turn on this option to allow the system to push rate, availability, and restriction updates to Hoterip.
  3. Activate Reservations: Enable this option to receive bookings from Hoterip.
  4. Send Reservation Voucher Email: Enable this option to trigger the automated delivery of a reservation voucher upon receipt of a new booking.
  5. Currency (if Different) section: Choose the currency if it differs from the system’s default. Enter the conversion rate and click the save (✓) button to apply the changes. set-hoterip-currency-v1.png
  6. Manual OTA Update: To synchronizes rates, availability, minimum stay requirements, and "Stop Sell" statuses across all connected channels. Data can be synchronized up to the maximum date range permitted by each individual OTA (typically between 12 and 24 months in advance).

How to Configure Manual OTA​

Use this feature to manually push updates to Hoterip .

  1. Scroll down to the OTA Update section.
  2. Click the OTA Update button to open the pop up window. ota-update.png
  3. Complete the required fields: ota-update-2.png
    • Date Selection : Choose the duration of the OTA update (e.g 1 month, 3 months, etc)
    • Room Type : Select the room type from the list.
    • Rate : Choose one or more rate plans. You can also select all rate plan if needed.
  4. Click Sync OTA to save and apply the changes.

[!NOTE]

Troubleshooting Settings​

Enable Channel or Activate Updates not working

  • Make sure the checkbox is selected and click the Update button afterward.
  • If the changes do not apply, refresh the page and try again.

Not receiving reservations from Hoterip

  • Confirm that Activate Reservations is turned on.
  • Make sure rate plans are mapped and active on both Hoterip and the system.

Reservation voucher email not received

  • Ensure Send Reservation Voucher Email is enabled.
  • Check your spam or junk folder, or confirm your email address in the notification settings. Import Future Hoterip Reservations not working
  • Refresh the page and click again.
  • If no reservations are imported, check with Hoterip if new bookings exist and are confirmed.

Currency field not saving properly

  • Click to clear, then re-select the currency code.
  • If left empty, the system will auto-detect the correct currency at the time of booking.

OTA Update not sending changes

  • Select at least one room or choose All Room Types before clicking OTA Update.
  • Wait a few minutes and review the Last 10 Updates section to confirm if it was logged.

Update marked as failed

  • Hover over the failed update entry to view the error message.
  • Confirm that the rate plan and room are still active in Hoteripe extranet.
  • Retry sending the update using the OTA Update button.